MS FASTENERS

Product Details:

ANCHOR FASTNERS. Anchor bolts are used to connect structural and non-structural elements to the concrete. The connection is made by an assembling of different components such as: anchor bolts (also named fasteners), steel plates , stiffeners. Anchor bolts transfer different types of load: tension forces and shear forces. A connection between structural elements can be represented by steel column attached to reinforced concrete foundation. Whereas, a common case of non-structural element attached to a structural one is represented by the connection between a facade system and a reinforced concrete wall. The simplest and strongest  form of anchor bolt is cast-in-place, with its embedded end consisting of a standard hexagonal head bolt and washer, 90-bend, or some sort of forged or welded flange. The last are used in concrete-steel composite structures as shear connectors. Other uses include anchoring machines to poured concrete floors and buildings to their concrete foundations. Various typically disposable aids, mainly of plastic, are produced to secure and align cast-in-place anchors prior to concrete placement. Moreover their position must also be coordinated with the reinforcement layout. Different types of cast-in-place anchors might be distinguished: *Lifting inserts: used for lifting operations of plain or prestressed RC beams. The insert can be a threaded rod. *Anchor channels: used in precast concrete connections. The channel can be a hot-rolled or a cold-formed steel shape in which a T-shape screw is placed in order to transfer the load to the base material. *Headed Stud: consist of a steel plate with headed studs welded. *Threaded sleeves: consist of a tube with an internal thread which is anchored back into the concrete. *For all the type of the cast-in-place anchors, the load-transfer mechanisms is the mechanical interlock, i.e. the embedded part of the anchors in concrete transfers an the applied load (axial or shear) via bearing pressure at the contact zone. At failure conditions, the level of bearing pressure can be higher than 10 times the concrete compressive strength, if a pure tension force is transferred. Cast-in-place type anchors are also utilized in masonry applications, placed in wet mortar joints during the laying of brick and cast blocks.

Product Details:

At Inox India, we manufacture MS Foundation Bolts. Mild steel [up to 0.3%carbon] is strong and tough. Higher grades can have more tensile strength, and be stronger, but they lose elasticity and are more expensive like the stainless steel bolts.

Additional Information:

• Production Capacity: 10000 TO 50000
• Delivery Time: EX STOCK
• Packaging Details: BOX PACKING.

Product Details:

At Inox India, we manufacture MS Zinc Plated Wedge Anchor Bolts. Mild steel [up to 0.3Êrbon] is strong and tough. Higher grades can have more tensile strength, and be stronger, but they lose elasticity and are more expensive like the stainless steel bolts.

Additional Information:

• Production Capacity: 10000 TO 50000
• Delivery Time: EX STOCK
• Packaging Details: BOX PACKING.

Product Details:

ANCHOR BOLT•Anchor bolts are used to connect structural and non-structural elements to the concrete. The connection is made by an assembling of different components such as: anchor bolts (also named fasteners), steel plates , stiffeners. Anchor bolts transfer different types of load: tension forces and shear forces. A connection between structural elements can be represented by steel column attached to reinforced concrete foundation. Whereas, a common case of non-structural element attached to a structural one is represented by the connection between a facade system and a reinforced concrete wall. The simplest – and strongest – form of anchor bolt is cast-in-place, with its embedded end consisting of a standard hexagonal head bolt and washer, 90-bend, or some sort of forged or welded flange. The last are used in concrete-steel composite structures as shear connectors. Other uses include anchoring machines to poured concrete floors and buildings to their concrete foundations. Various typically disposable aids, mainly of plastic, are produced to secure and align cast-in-place anchors prior to concrete placement. Moreover their position must also be coordinated with the reinforcement layout. Different types of cast-in-place anchors might be distinguished: *Lifting inserts: used for lifting operations of plain or prestressed RC beams. The insert can be a threaded rod. *Anchor channels: used in precast concrete connections. The channel can be a hot-rolled or a cold-formed steel shape in which a T-shape screw is placed in order to transfer the load to the base material. *Headed Stud: consist of a steel plate with headed studs welded. *Threaded sleeves: consist of a tube with an internal thread which is anchored back into the concrete. *For all the type of the cast-in-place anchors, the load-transfer mechanisms is the mechanical interlock, i.e. the embedded part of the anchors in concrete transfers an the applied load (axial or shear) via bearing pressure at the contact zone. At failure conditions, the level of bearing pressure can be higher than 10 times the concrete compressive strength, if a pure tension force is transferred. Cast-in-place type anchors are also utilized in masonry applications, placed in wet mortar joints during the laying of brick and cast blocks.

Additional Information:

• Production Capacity: 10000 TO 50000
• Delivery Time: EX STOCK
• Packaging Details: BOX PACKING.

Product Details:

Hot dip galvanized is an alternative to stainless-steel fasteners. Stainless steel fasteners are generally used where corrosion level in the atmosphere is on the higher side.

Hot dip galvanized Bolts and Nuts are made from, alloy steel that's dipped in a hot malt of hot dip galvanizing protective (zinc). These Bolts and Nuts are best known for its durability & low maintenance.

A galvanized fastener will withstand corrosion much longer than a bolt without any coating. According to the American Galvanizers Association, galvanized steel “corrodes at a rate of 1/30 of bare steel in the same environment.”

Hot-dip galvanizing can result in a weight increase of “black” (un-galvanized) steel of up to 20%. The increase in weight is determined by the combination of a series of factors, the main one being the composition of the steel in the material to be galvanized 

We manufacture a wide range of hot dip galvanized Bolts and Nuts that are extensively used for joining heavy duty components. Fabricated using advanced machining process, these hot dip galvanized Bolts and Nuts have excellent finishing and galvanized coating, which ensure resistance against rust and corrosion. Our range is available in various sizes and specifications to meet the varied requirements of the clients.

These hot dip galvanized fasteners are made up of quality raw materials. We have variety of fasteners such as mild steel series 5.6, 4.6 & 8.8 grades. These fasteners are best known for its durability & low maintenance. We manufacture a wide range of hot dip galvanized fasteners that are extensively used for joining heavy duty components. Fabricated using advanced machining process, these hot dip galvanized fasteners have excellent finishing and galvanized coating, which ensure resistance against rust and corrosion. Our range is available in various sizes and specifications to meet the varied requirements of the clients.

Additional Information:

• Production Capacity: 10000 TO 50000
• Delivery Time: EX STOCK
• Packaging Details: BOX PACKING.